cancel

DM&P SoC Vortex86DX - 800MHz
VDX-6324RD

4S/4U/VGA/LCD/LAN/LPT/PWM/16GPIO/CF/IDE

  • Vortex86DX 800MHz
  • 256MB
  • 512MB
  • RS-232
  • RS-422
  • RS-485
  • USB
  • LAN
  • LPT
  • PWM
  • GPIO
  • VGA
  • LCD

Specifications

  • DM&P SoC Vortex86DX - 800MHz

  • 4S/4U/VGA/LCD/LAN/LPT/PWM/16GPIO/CF/IDE

  • 256MB / 512MB DDR2 onboard

  • Operation Temperature: -20 ~ +70°C / -40 ~ +85°C (Optional)

  • Onboard 4MB SPI Flash

  • PC/104 Connector Onboard

  • Optional: Onboard Flash Disk / CF socket / PCI-104 Connector / Audio

Manual

Datasheet

Technical Resource

SoC DM&P SoC CPU Vortex86DX- 800MHz
Real-Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache, L2 Cache 128 KB
Bus PC/104 standard compliant
PCI-104 (Optional)
BIOS AMI BIOS
System Memory 256/512MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5μ sec. to 512 sec. x 2 sets
(Watchdog 1 fully compatible with M6117D)
VGA XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors
LAN Integrated 10/100Mbps Ethernet
Audio CM119 USB Audio Controller (Optional)
Flash Disk Support Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
PWM 16~24 Channels
SRAM support 512KB (Optional)
I/O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x4
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors 2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.54mm 26-pin box header for Printer x1
2.54mm 20-pin box header for 16-bit GPIO x1
2.54mm 10-pin box header for RS-232 x3
2.54mm 10-pin box header for USB x2
2.54mm 4-pin header for -5V, -12V, +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
4-pin male power connector x1
External 15-pin D-Sub female connector for VGA x1
External 9-pin D-Sub male connector for RS-232 x1
External RJ-45 connector for Ethernet x1
External Mini-DIN connector for Keyboard/Mouse x1
Type I/II Compact Flash Slot x1
Power Requirement Single Voltage +5V @ 700mA
Weight 180g
Board Size 184 x 122mm (7.24 x 4.80 inches)
Operating Temperature -20 °C ~ +70 °C
-40 °C ~ +85 °C (Optional)
Part Number Description
VDX-6324RD Vortex86DX Half-Size CPU Module with 256MB DDR2
VDX-6324RD-512 Vortex86DX Half-Size CPU Module with 512MB DDR2

The VDX-6324RD family of low-power x86 embedded controller is designed to meet Half-Size specification with full 16-bit ISA Bus, and integrated with the following features.

The VDX-6324RD Half-Size family of embedded controller is designed with backward compatibility in mind to provide a migration path for projects facing end-of-life challenges with their existing x86 based Half-Size controller. The VDX-6324RD family of controllers is designed as a plug-in replacement, with backward compatibility to support legacy software to extend the existing product life cycle without heavy re-engineering.

VDX-6324RD is suitable for a broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device, Human-machine interface, Robotics, machinery control, And more…application that required small footprint, low-power and low-cost hardware with an open industry standard such as Half-Size.

Contact info@icop.com.tw for detailed information.