cancel

DM&P SoC Vortex86SX - 300MHz
VSX-6124-V2

4S/4U/VGA/LCD/LAN/LPT/16GPIO/IDE

  • Vortex86SX 300MHz
  • 128MB
  • 256MB
  • RS-232
  • RS-422
  • RS-485
  • USB
  • LAN
  • LPT
  • GPIO
  • VGA
  • LCD

Specifications

  • DM&P SoC Vortex86SX - 300MHz

  • 4S/4U/VGA/LCD/LAN/LPT/16GPIO/IDE

  • 128MB / 256MB DDR2 onboard

  • Operation Temperature: -20 ~ +70°C / -40 ~ +85°C (Optional)

  • Onboard 2MB SPI Flash

  • PC/104 Connector Onboard

  • Optional: Onboard Flash Disk / CF socket / PCI-104 Connector

Manual

Datasheet

Technical Resource

CPU DM&P SoC CPU Vortex86SX- 300MHz
Real-Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache
BIOS AMI BIOS
Bus Interface PC/104 Standard Compliant (Optional: PCI-104)
System Memory 128 /256MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5 us to 512 seconds x2 sets
(Watchdog 1 fully compatible with M6117D)
VGA XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support LVDS Flat Panel Interface Support (Optional)
Onboard 32MB VGA Memory
Support resolution up to 1280 x 1024
LAN Integrated 10/100M Ethernet
Audio CM119 USB Audio Controller (Optional)
I /O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
FDD x1
RS-232 port x3
RS-232/485/422 port x1 (RS485 Auto Direction)
Parallel port x1
USB port (2.0) x4
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors 2.54 mm Ø 26-pin box header for Printer x1
2.54 mm Ø 10-pin box header for RS-232 x3
2.54 mm Ø 10-pin box header for USB x2
2.54 mm Ø 20-pin box header for 16-bit GPIO x1
2.54 mm Ø 3-pin header for RS-485 x1
2.54 mm Ø 2-pin header for Reset x1
2.54 mm Ø 4-pin header for DC-in x1
2.54 mm Ø 7-pin header for Redundancy Signal x1(O)
2.54 mm Ø2-pin header for SYS-SW-IN x1 (Opt)
2.0 mm Ø 44-pin box header for IDE x1
2.0 mm Ø 44-pin box header for LCD x1
1.25 mm Ø 6-pin Wafer for JTAG x1
1.25 mm Ø 4-pin Wafer for Line-out/MIC-in x2 (O)
External RJ-45 connector for Ethernet x1
External Mini-DIN connector for KBD/Mouse x1
External D-Sub 15 pin female connector for VGA x1
External D-Sub 9 pin male connector for RS232 x1
Type I/II Compact Flash Slot x1 (Optional)
4-pin Male Power Connector x1
Flash Disk Support Onboard 2MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Compact Flash Type I/II (Optional)
SRAM support 512KB (Optional)
Power Requirement Single Voltage +5V @ 660mA
Dimension 184mm X 122mm (7.24 x4.80 inches)
Weight 176g
Operating Temperature -20°C ~ +70°C
-40°C ~ +85°C (Optional)
PART NUMBER DESCRIPTION
VSX-6124-V2 Vortex86SX Half-Size CPU Module with 128MB DDR2

The VSX-6124-FD-V2 family of low-power x86 embedded controller is designed to meet Half-Size specification with full 16-bit ISA Bus, and integrated with the following features.

The VSX-6124-FD-V2 Half-Size family of embedded controller is designed with backward compatibility in mind to provide a migration path for projects facing end-of-life challenges with their existing x86 based Half-Size controller. The VSX-6124-FD-V2 family of controllers is designed as a plug-in replacement, with backward compatibility to support legacy software to extend the existing product life cycle without heavy re-engineering. 

VSX-6124-FD-V2 is suitable for a broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device, Human-machine interface, Robotics, machinery control, And more…application that required small footprint, low-power and low-cost hardware with an open industry standard such as Half-Size.

Contact info@icop.com.tw for detailed information.