cancel

DM&P SoC Vortex86DX- 800MHz
VDX-6353RD

4S/2U/VGA/LCD/LVDS/LAN/LPT/PWM/SPI/16GPIO/CF/IDE

  • Vortex86DX 800MHz
  • 256MB
  • 512MB
  • RS-232
  • RS-422
  • RS-485
  • USB
  • LAN
  • LPT
  • PWM
  • SPI flash
  • GPIO
  • VGA
  • LCD
  • LVDS

Specifications

  • DM&P SoC Vortex86DX- 800MHz

  • 256MB / 512MB DDR2 onboard

  • 4S/2U/VGA/LCD/LVDS/LAN/LPT/PWM/SPI/16GPIO/CF/IDE

  • Operation Temperature: -20 ~ +70°C / -40 ~ +85°C (Optional)

  • Onboard 4MB SPI Flash Disk

  • Optional: USB Audio Controller

Manual

Datasheet

Technical Resource

SoC DM&P SoC CPU Vortex86DX- 800MHz
Real-Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache L2 Cache 128KB
Bus PC/104 standard compliant
BIOS AMI BIOS
System Memory 256/512MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5μ sec. to 512 sec. x 2 sets
(Watchdog 1 fully compatible with M6117D)
VGA XGI Volari Z9s Chipset
VGA and TFT/LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors
LAN Integrated 10/100Mbps Ethernet
Audio CM119 USB audio controller (Optional)
Flash Disk Support Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
PWM 16~24 Channels
I/O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x2
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors 2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.0mm 26-pin box header for Printer x1
2.0mm 20-pin box header for 16-bit GPIO x1
2.0mm 16-pin header for LVDS x1
2.0mm 10-pin box header for VGA x1
2.0mm 10-pin box header for USB x1
2.0mm 10-pin box header for RS-232 x4
2.0mm 8-pin header for Ethernet x1
2.54mm 5-pin box header for Keyboard x1
2.54mm 5-pin header for Mouse x1
2.54mm 4-pin header for -5V, -12V +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
Power Requirement Single Voltage +5V @ 720mA
Weight 90g
Board Size 90 x 96mm (3.54 x 3.77 inches)
Operating Temperature -20°C ~ +70°C
-40°C ~ +85°C (Optional)
Part Number Description
VDX-6353RD Vortex86DX PC/104 CPU Module with 256MB DDR2
VDX-6353RD-512 Vortex86DX PC/104 CPU Module with 512MB DDR2
VDX-6353RD-AU Vortex86DX PC/104 CPU Module with 256MB DDR2,

The VDX-6353RD family of low-power x86 embedded controllers is designed to meet PC/104 specifications and integrated with the following features.

The VDX-6353RD PC/104 family of embedded controllers are designed with backward compatibility in mind to provide a migration path for projects facing end-of-life challenges with their existing x86 based PC/104 controller. The VDX-6353RD family of controllers is designed as a plug-in replacement, with backward compatibility to support legacy software to help extend the existing product life cycle without heavy re-engineering.

VDX-6353RD is suitable for a broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device, Human-machine interface, Robotics, machinery control, And more…application that required small footprint, low-power and low-cost hardware with an open industry standard such as PC/104.

Contact info@icop.com.tw for detailed info.