cancel

DM&P SoC Vortex86DX-800MHz
VDX-6315RD

4S/2U/LAN/LPT/PWM/32GPIO/IDE

  • Vortex86DX 800MHz
  • 256MB
  • 512MB
  • RS-232
  • RS-422
  • RS-485
  • USB
  • LAN
  • LPT
  • PWM
  • GPIO

Specifications

  • DM&P SoC Vortex86DX-800MHz

  • 256MB / 512MB DDR2 onboard

  • 4S/2U/LAN/LPT/32GPIO/IDE

  • Operation Temperature: -20~+70°C / -40°C~+85°C (Optional)

  • Onboard 4MB SPI Flash Disk

  • 16bit x-ISA

  • Optional:512KB SRAM

Manual

Datasheet

Technical Resource

SoC DM&P SoC CPU Vortex86DX- 800MHz
Real-Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-cache L2 Cache 128KB
Bus 16-bit x-ISA interface
BIOS AMI BIOS
System Memory 256/512MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5μ sec. to 512 sec. x 2 sets
(Watchdog 1 fully compatible with M6117D)
LAN Integrated 10/100Mbps Ethernet
Flash Disk Support Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
44-pin IDE to Micro SD (Optional)
PWM 24~32 Channels
SRAM support 512KB (Optional)
I/O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x2
Parallel port x1
16-bit GPIO port x2
10/100Mbps Ethernet port x1
Connectors 2.0mm 44-pin box header for IDE x1
2.0mm 26-pin box header for Printer x1
2.0mm 20-pin box header for 16-bit GPIO x2
2.0mm 10-pin box header for USB x1
2.0mm 10-pin box header for RS-232 x4
2.0mm 8-pin header for Ethernet x1 (Optional)
2.0mm 2-pin header for Reset x1
2.0mm 2-pin header for Console redirection x1
2.54mm 5-pin box header for Keyboard x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for LINK LED x1
2.54mm 2-pin header for TX/RX LED x1
1.25mm 6-pin wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Power Requirement Single Voltage +5V @ 400mA
Weight 63g
Board Size 100 x 66mm (3.94 x 2.6 inches)
Operating Temperature -20 °C ~ +70 °C
-40 °C ~ +85 °C (Optional)
Part Number Description
VDX-6315RD Vortex86DX Tiny CPU Module with 256MB DDR2
VDX-6315RD-512 Vortex86DX Tiny CPU Module with 512MB DDR2
ICOP-2720 Tiny VGA/LCD Development Kit

The VDX-6315RD family of low-power x86 embedded controller is designed to meet Tiny specification and integrated with the following features.

The VDX-6315RD Tiny family of embedded controller is designed with backward compatibility in mind to provide a migration path for projects facing end-of-life challenges with their existing x86 based Tiny controller. The VDX-6315RD family of controllers is designed as a plug-in replacement, with backward compatibility to support legacy software to extend the existing product life cycle without heavy re-engineering.

VDX-6315RD is suitable for a broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device, Human-machine interface, Robotics, machinery control And more…application that required small footprint, low-power and low-cost hardware with open industry-standard such asTiny.

Contact info@icop.com.tw for detailed information.