cancel

DM&P SoC Vortex86SX-300MHz
VSX-6114-V2

4S/2U/VGA/LVDS/LAN/16GPIO/IDE

  • x86/Vortex86SX 300MHz
  • 128MB
  • 256MB
  • RS-232
  • RS-422
  • RS-485
  • USB
  • LAN
  • GPIO
  • VGA
  • LVDS

Specifications

  • DM&P SoC Vortex86SX-300MHz

  • 128MB / 256MB DDR2 onboard

  • 4S/2U/VGA/LVDS/LAN/16GPIO/IDE

  • Operation Temperature: -20~+70°C / -40°C~+85°C (Optional)

  • Onboard 2MB SPI Flash Disk

  • Optional:Audio

Manual

Datasheet

Technical Resource

SoC DM&P SoC CPU Vortex86SX- 300MHz
Real-Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache
Bus 16-bit x-ISA interface
BIOS AMI BIOS
System Memory 128/256MB DDR2 Onboard
Watchdog Timer
0 & 1 Sets
Software programmable from 30.5μ sec. to 512 sec. x 2 sets
(Watchdog 1 fully compatible with M6117D)
VGA XGI Volari Z9s Chipset
VGA and LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors
LAN Integrated 10/100Mbps Ethernet
Flash Disk Support Onboard 2MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
I/O Interface Enhanced IDE port x1
RS-232 port x3
RS-232/485 port x1
USB port (Ver2.0) x2
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors 2.0mm 44-pin box header for IDE x1
2.0mm 20-pin box header for 16-bit GPIO x1
2.0mm 10-pin box header for RS-232 x4
2.0mm 10-pin box header for USB x1
2.0mm 10-pin box header for VGA x1
2.0mm 16-pin header for LVDS x1
2.54mm 5-pin box header for Keyboard x1
2.54mm 5-pin header for Mouse x1
2.54mm 3-pin header for RS-485 x1
1.25mm 6-pin wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Power Requirement Single Voltage +5V @ 620mA
Weight 63g
Board Size 100 x 66mm (3.94 x 2.6 inches)
Operating Temperature -20°C ~ +70°C
-40°C ~ +85°C (Optional)
PART NUMBER DESCRIPTION
VSX-6114-V2 Vortex86SX Tiny CPU Module with 128MB DDR2

The VSX-6114-V2 family of low-power x86 embedded controller is designed to meet Tiny specification and integrated with the following features.

The VSX-6114-V2 Tiny family of embedded controller is designed with backward compatibility in mind to provide a migration path for projects facing end-of-life challenges with their existing x86 based Tiny controller. The VSX-6114-V2 family of controllers is designed as a plug-in replacement, with backward compatibility to support legacy software to extend the existing product life cycle without heavy re-engineering.

VSX-6114-V2 is suitable for a broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device, Human-machine interface, Robotics, machinery control, And more…application that required small footprint, low-power and low-cost hardware with open industry-standard such asTiny.

Contact info@icop.com.tw for detailed information.