Specifications
DM&P SoC Vortex86DX- 800MHz
256MB / 512MB DDR2 onboard
4S/2U/VGA/LCD/2LAN/PWM/16GPIO/CF
Operation Temperature: -20 ~ +70°C / -40 ~ +85°C (Optional)
Onboard 4MB SPI Flash Disk
x-PCI Connector
PC/104 Connector Onboard
| SoC | DM&P SoC CPU Vortex86DX- 800MHz Real-Time Clock with Lithium Battery Backup |
| Cache | L1:16K I-Cache, 16K D-Cache L2 Cache 128KB |
| Bus | PC/104 standard compliant 32-bit x-PCI interface, compatible with PCI Rev.2.1 |
| BIOS | AMI BIOS |
| System Memory | 256/512MB DDR2 Onboard |
| Watchdog Timer | Software programmable from 30.5μ sec. to 512 sec. x 2 sets (Watchdog 1 fully compatible with M6117D) |
| VGA | XGI Volari Z9s Chipset VGA and TFT Flat Panel Interface Support Onboard 32MB VGA Memory, support resolution up to 1280x1024, 16M colors |
| LAN | Realtek 8100B 10/100Mbps Ethernet Controller Half/Full duplex capability |
| Audio | CM119 USB Audio controller |
| Flash Disk Support | Onboard 4MB SPI Flash Disk MSTI EmbedDisk Module (16MB and above) Compact Flash Type I/II 44-pin IDE to Micro SD (Optional) |
| SRAM Support | 512KB (Optional) |
| I/O Interface | Enhanced IDE port (UltraDMA-100/66/33) x1 FDD x 1 RS-232 port x5 RS-232/422/485 port x1 USB port (2.0) x2 Parallel port x1 10/100Mbps Ethernet port x2 |
| Connectors | 2.54mm 4-pin header for +12V, -12V, -5V, GND x 1 2.54mm 5-pin box header for keyboard x1 2.54mm 5-pin header for Mouse x1 2.54mm 3-pin header for RS-485 x1 2.54mm 2-pin header for Reset x1 2.0mm 8-pin header for Ethernet x2 2.0mm 44-pin box header for IDE x1 2.0mm 44-pin box header for LCD x1 2.0mm 34-pin box header for FDD x 1 2.0mm 26-pin box header for Printer x1 2.0mm 10-pin box header for RS-232 x6 2.0mm 10-pin box header for USB x1 2.0mm 10-pin box header for VGA x1 2.0mm 4-pin wafer for Line-out/MIC-in x2 1.25mm 6-pin wafer for JTAG x1 Type I/II Compact Flash Slot x1 |
| Power Requirement | Single Voltage +5V @ 800mA |
| Weight | 150g |
| Board Size | 102 x 146mm (4.01 x 5.75 inches) |
| Operating Temperature | -20°C ~ +70°C -40°C ~ +85°C (Optional) |
| PART NUMBER | DESCRIPTION |
| VDX-6329RD | Vortex86DX 3.5" CPU Module with 256MB DDR2 |
| VDX-6329RD-512 | Vortex86DX 3.5" CPU Module with 512MB DDR2 |
The VDX-6329 family of low-power x86 embedded controller is designed to meet the 3.5” specification and integrated with the following features.
The VDX-6329 3.5” family of embedded controller is designed with backward compatibility in mind to provide a migration path for projects facing end-of-life challenges with their existing x86 based 3.5” controller. The VDX-6329 family of controllers is designed as a plug-in replacement, with backward compatibility to support legacy software to extend the existing product life cycle without heavy re-engineering.
VDX-6329 is suitable for a broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device, Human-machine interface, Robotics, machinery control, And more…application that required small footprint, low-power and low-cost hardware with an open industry standard such as 3.5 ”.
Contact info@icop.com.tw for detailed information.
